Using A Hydraulic Sheave Lock Versus Traditional Methods to Safely Lock Out A Beam Pumping Unit Tracie Reed – Silverstream Energy Solutions Don Foley – KUDO Energy Services Kurt Richard – KUDO Energy Services 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 This presentation will share experiences and discuss common challenges […]
Developing a Sensorless Dynocard Simon Jagers – Samotics 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 Detecting mechanical faults on Sucker Rod Pumps at an early, developing stage benefits the reliability and performance of these pumps. Traditionally, load cells have been installed to produce a dyno card. For this purpose, the […]
Automated Viscous Damping Correction and Optimal Inferred Production Calculation Dr. Victoria Pons – WellWorx Energy Jeremy Gomes – WellWorx Energy 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 When controlling and optimizing a sucker rod pumped well, position and load at the pump must be calculated from surface position and load […]
High Resolution Pressure Reveals Rod Pump Performance Toku Ito – Toku Systems 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 This is a case study designed to confirm that high frequency, high resolution pressure data measured at the wellhead of a pump jack well can be used to evaluate and optimize […]
Horizontal Well Downhole Dynamometer Data Acquisition (HWDDDA) Dr. Victoria Pons – WellWorx Energy Dr. Tony Podio – Consultant Lynn Rowlan – Echometer Company Robert Valadez – Marathon Michael Romer – ExxonMobil Walter Phillips – Wansco Wyatt Tubb – ETA International Clarence Foytik – Micro-Smart Systems 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA […]
Gas Interference in Lifted Wells – A New Approach to an Old Problem Bob Berland, P.E. – Energy Solutions Generator 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 Gas interference in downhole oilfield pumps is an old and well-known problem. Horizontal wellbore topology and construction exasperates this problem. Artificially lifting an […]
Tubing Anchor Catchers (TACs) Have Been Limiting Production for Too Long, It’s Time for Change Jeff Saponja – Oilify Furqan Chaudhry – Ovintiv Corbin Coyes – Q2 Artificial Lift 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 Sucker rod pumping commonly requires the tubing string assembly to be secured to the […]
Avoiding Environmental and Financial Impact of Stuffing Box Leakage! Rob Harrison, M.A., SCMP – Well Site Guard Ltd. 2023 ALRDC International Sucker Rod Pumping Workshop Midland, TX, USA August 28-31 This presentation discusses the costs of stuffing box leaks and the benefits of proactive prevention.
As many as 10% of Laramie Energy, LLC’s wells were non‐producing or under‐producing due to deep‐set tubing or mechanical restrictions in tubing or casing. A program of evaluating existing completions followed by tubing perforation and reestablishment of plunger lift was undertaken to restore economically viability to these wells.
One of the benefits of utilizing a Sucker Rod Pump for artificially lifted oil and gas wells is that they can achieve total drawdown of the casing fluid above the downhole pump. This allows for the pump to maximize the production of the well by minimizing the back pressure on the reservoir caused by the […]