2019 41st Annual International Gas-Lift Workshop

Sponsored in 2019 by ALRDC and the Southwestern Petroleum Short Course (SWPSC).

   

 

The 2019 41st Annual International Gas-Lift Workshop will be held in Houston, Texas, USA, on June 3 - 7, 2019.

 

      

   2019 General Chair: Steven Freeman, Shell International EP

Cleon Dunham:      cleon@oilfieldautomation.com

Steven Freeman:   steven.freeman@shell.com

John Martinez       pa.amart@juno.com

Greg Stephenson   gregory_stephenson@oxy.com

 

 

ALRDC Web Site:  www.alrdc.com

 

Register for the Workshop:  Go to the Registration Forms page.

 

 

Importance of Gas-Lift Use these links to see the importance of gas-lift to the following major Operating Companies.

 

Note:  If you come from a country where you need a VISA to enter the United States, or if you need an invitation to obtain a VISA to enter the US, please contact Cleon  Dunham at cleon@oilfieldautomation.com.

 

Note There will be no refunds of registration costs after May 17, 2019.  Of course, on-site registration at the event will be accepted.

 

Technical Sessions

Auxiliary Sessions Social Activities

Session I --- Sub-Sea, Horizontal Wells

Panel Discussions Reception

Session II --- Gas-Lift Technology, Design, Automation

Break-Out Sessions Keynote Lunch and Address

Session III --- Gas-Lift Field Case Histories

Exhibits/Displays Workshop Dinner

Session IV --- Gas-Lift Standards, API Recommendations

Poster Sessions, if Requested Breaks

Note:  This list of sessions is tentative at this time and may change based on needs in the industry.

   

Costs to Register for the Technical Workshop

Workshop Registration Cost before May 17, 2019 Cost after May 17, 2019

Workshop attendees

 

$650

$750

Discounted cost for active API Gas-Lift Work Group/Task Group Members who are actively working on API documents.  You must confirm your membership on the API teams to receive the discount.

$500

 

$550

 

 

Students (must be in full-time attendance at a School of Higher Education)

Note;  Due to the significant discount, the number of students who will be accepted at this cost will be limited to 10.  They will be accepted on a "First Come, First Served" basis.

 

$150

$150

The Technical Presentations will be loaded on the www.alrdc.com web site after the

Workshop.  They can be downloaded for free within a week after the Workshop.

 

$0

$0

Note:  These costs include Workshop attendance, Workshop materials, breakfasts, lunches, welcome reception (Tuesday, June 4) and Workshop dinner (Wednesday, June 5).

 

Note:  All costs shown here are in U.S. $.

Cost to Register for the Gas-Lift Continuing Education Courses

Continuing Education Course Cost before May 17, 2019 Cost after May 17, 2019

You may choose one of the following two-day courses:

  - Gas-Lift Design

  - Gas-Lift Troubleshooting and Surveillance

  - Gas-Lift Automation and Optimization

  See details on Course Outlines page

 

$600

 

$700

Students

 

$150

$150

Note:  These costs include Course attendance, Course materials, breakfasts, and lunches.

 

Discounts if Register for both the Technical Workshop and a Course

Continuing Education Course Cost before May 17, 2019 Cost after May 17, 2019

Workshop Attendees

$1050

$1150

API and IBP Members

$1000

$1050

Students

$250

$250

Note:  These costs include Course attendance, Course materials, breakfasts, and lunches.

 

 

Cost to Register for the an Exhibit Area

Exhibit Areas Cost before May 17, 2019 Cost after May 17, 2019

Double Booth

2,500 3,000

Single Booth

1,500 2,000

Discount off normal workshop registration fee, for one person per paid exhibit.

 

-$250

-$250

Cost per person to see/staff exhibits only, and not attend technical presentations or courses.

 

$150 per day

$150 per day

Please make certain your exhibit/display items fit within the size you have selected.  If any change is needed in the size, or in the exhibit contact, please notify Ronda Brewer immediately.  Information about shipping/receiving exhibit materials will be sent out at least one month prior to the workshop date.  Please check this website for periodic updates.

 

Note Exhibits should be installed on Monday morning or afternoon, June 3, 2019.  They must be set up before the reception on Tuesday evening.  They may be taken down after the last break on Thursday, June 6, 2019. 

Cost to Register for the a Sponsorship

Exhibit Areas Cost before May 17, 2019 Cost after May 17, 2019

Platinum Share --- Sponsor the Reception

10,000

10,000

Diamond Share --- Sponsor the Workshop Dinner

7,500

7.500

Gold Share  --- Sponsor Lunch 

5.000

5,000

Wednesday Breakfast or Break Sponsor

2,000

2,000

Thursday Breakfast or Break Sponsor

2,000

2,000

Keynote Lunch Sponsor 1,000 1,000

Note:  All Sponsors will be highlighted on the www.alrdc.com web page and on a special poster at the Workshop.

 

 

 

DISCLAIMER

 

The following disclaimer shall be included as the last page of a Technical Presentation or Continuing Education Course.  A similar disclaimer is included on the front page of the Gas-Lift Workshop Web Site.

 

The Artificial Lift Research and Development Council and its officers and trustees, and the Gas-Lift Workshop Steering Committee members, and their supporting organizations and companies (here-in-after referred to as the Sponsoring Organizations), and the author(s) of this Technical Presentation or Continuing Education Training Course and their company(ies), provide this presentation and/or training material at the Gas-Lift Workshop "as is" without any warranty of any kind, express or implied, as to the accuracy of the information or the products or services referred to by any presenter (in so far as such warranties may be excluded under any relevant law) and these members and their companies will not be liable for unlawful actions and any losses or damage that may result from use of any presentation as a consequence of any inaccuracies in, or any omission from, the information which therein may be contained.

 

The views, opinions, and conclusions expressed in these presentations and/or training materials are those of the author and not necessarily those of the Sponsoring Organizations.  The author is solely responsible for the content of the materials.

 

The Sponsoring Organizations cannot and do not warrant the accuracy of these documents beyond the source documents, although we do make every attempt to work from authoritative sources.   The Sponsoring Organizations provide these presentations and/or training materials as a service.  The Sponsoring Organizations make no representations or warranties, express or implied, with respect to the presentations and/or training materials, or any part thereof, including any warrantees of title, non-infringement of copyright or patent rights of others, merchantability, or fitness or suitability for any purpose.

 

COPYRIGHT

 

Rights to this presentation are owned by the company(ies) and/or author(s) listed on the title page.  By submitting this presentation to the Gas-Lift Workshop, they grant to the Workshop and the Artificial Lift Research and Development Council (ALRDC), rights to:

  • Display the presentation at the Workshop.

  • Place it on the www.alrdc.com web site, with access to the site to be as directed by the Workshop Steering Committee.

  • Place it on a CD for distribution and/or sale as directed by the Workshop Steering Committee.

Other uses of this presentation are prohibited without the expressed written permission of the company(ies) and/or author(s) who own it and the Workshop Steering Committee.